How to Turn Off Subaru Passenger Airbag

How To Turn Off Subaru Passenger Airbag

The passenger airbag in your Subaru is an important safety feature designed to protect passengers in the event of a collision. However, in some situations, you may need to turn off the passenger airbag, such as when traveling with a child in a car seat. In this guide, we'll show you how to turn off your Subaru passenger airbag, including step-by-step instructions and important safety considerations.

Locate the Airbag Control Module

The airbag control module in your Subaru is responsible for controlling the function of the airbag system, including the passenger airbag. To turn off the passenger airbag, you'll need to locate the airbag control module. In most Subaru models, the airbag control module is located under the center console or dashboard.

• Locate the negative battery terminal in the engine compartment.
• Loosen the bolt holding the negative cable in place.
• Carefully remove the negative cable from the battery and secure it away from the battery terminal.

Remove the Fuse

To turn off the passenger airbag, you'll need to remove the fuse that controls the airbag system. Here's how to do it:

• Locate the fuse box in your Subaru. The fuse box is typically located under the dashboard or in the
• engine compartment.
• Refer to your Subaru owner's manual to identify the fuse that controls the airbag system.
• Use a pair of pliers or a fuse puller to remove the fuse from the fuse box.

Store the Fuse

After removing the fuse that controls the airbag system, you'll need to store it in a safe place. Here's how to do it:

• Place the fuse in a small plastic bag to prevent it from getting lost or damaged.
• Label the plastic bag with the name of the fuse and the date it was removed.
• Store the plastic bag in a safe place where it won't be disturbed.

Turn On the Airbag Warning Light

Once the fuse has been removed, you'll need to turn on the airbag warning light to indicate that the airbag system is disabled. Here's how to do it:

• Turn on the ignition switch in your Subaru.
• Wait for the airbag warning light to appear on the dashboard. The airbag warning light is typically
• yellow or orange in color.
• Turn off the ignition switch.

Safety Considerations

Turning off the passenger airbag can be a dangerous process if not done correctly. It's important to follow all safety precautions to prevent accidental deployment of the airbag. Here are some important safety considerations:

• Only turn off the passenger airbag if it is absolutely necessary.
• Always remove the fuse that controls the airbag system to turn off the passenger airbag.
• Store the fuse in a safe place where it won't be lost or damaged.
• Turn on the airbag warning light to indicate that the airbag system is disabled.
• Do not attempt to tamper with the airbag system in any other way.

Turn off Passenger Airbag

Turning off the passenger airbag in your Subaru can be a simple and straightforward process with the right tools and precautions. By following the steps outlined in this guide and prioritizing safety at all times, you can help ensure that your Subaru's airbag system is functioning properly and ready to protect you and your passengers in the event of a collision. If you're unsure about any aspect of turning off the passenger airbag or if you encounter any issues during the process, it's always best to consult a professional mechanic or dealership for assistance.